亚洲综合憿情五月丁香五月网

a.Product name : NEOTEX - 7606

b.Usage of product : Spin finish for Polyester FDY(SDY)

c. Company information : Tae Won Chemical Co.,

1729-2, Songjung-Dong, Gangseo-Gu, Busan, Korea

Tel + 82 70 8683 7550, Fax +82 31 558 7554

c.Date : 2011-1-20

d.Version : 0.0

a.Emergency over view : Yellowish clear liquid

b.Eye contact : Slightly irritation to eyes.

c.Skin contact : No more than slightly irritation toskin.

             Not toxic if absorbed.

d.Inhalation : No more than slightly toxic if absorbed.

e.Ingestion : No more than slightly toxic if swallowed.

          Significant adverse health effects are not expected to develop if onlysmall amounts

          (less than mouthful) are swallowed.

a. If in eyes : Immediately flush with plenty of water for at least 15minutes.

           If easy to do, remove any contactlenses.

           Get medical attention.

           Remove material from skin andclothing.

b. If onskin : Immediately flush with plenty of water.

           Remove contaminated clothing.

           Get medical attention if irritationpersists.

           Wash clothing before reuse.

c. If inhaled : Immediate first aid is not likely to be required.

           If symptoms occur, remove to freshair.

           Remove material from eye, skin andclothing.

d. Ifswallowed : Immediate first aid is not likely to be required.

A physician or PoisonControlCentercan be contacted for advice.

Wash heavily contaminated clothing before reuse.

a.Flammability : Non-flammable

b.Hazardous products of combustion : carbon monooxide ; carbon dioxide

c.Extinguishing media : Water spray, foam, drychemical, or carbon dioxide

d.Unusual fire and explosion hazards : Non known

e.Fire fighting equipment : Fire fighters, andothers exposed, wear self-contained breathing                                                                                  

apparatus.

                       Equipment should be thoroughlydecontaminated after use.

a. Personal precautions : Use personal protection recommended in Section8.

b. Environmental precautions : Keep out of drains and water courses.

c. Methods for cleaning up : Contain large spills with dikes andtransfer the material to appropri-

ate containers for reclamation or disposal.

Absorb remaining material or small spills with an inert material and

then place in chemical waste container.

Flush spill area with water.

a.Handling : Emptied containers retain vapour andproduct residue.

Observe all recommended safety precautions until container is cleaned,reconditio-

nded or destroyed.

The reuse of this material`s container for non industrial purpose isprohibited and

any reuse must be in consideration of the data provided in thisdocument.

b. Storage : Stable under normal conditions of handling and storage.

a.Eye protection : Does not cause significant eye irritation or eyetoxicity requiring special protec-

tection. Use good industrial practice to avoideye contact.

b.Hand protection : Wear chemical resistantgloves. Consult the glove/clothing manufacturer to

determine the appropriate type glove/clothing for a given application.

c. Body protection : Wear suitable protective clothing. Consult theglove/clothing manufacturer to

determine the appropriate type glove/clothing for given application. Wash co-

taminated skin promptly. Launder contaminated clothing and cleanprotecti-

ve equipment before reuse. Wash thoroughly after handling.

d.Respiratory protection : This material is notlikely to present an airborne exposure concern un-

der normal conditions of use. Avoid breathing vapour or mist. Use app-

roved positive pressure atmosphere supplying respiratory protection

equipment for a given application. Observe respirator use limitations

specified by the manufacturer.

e.Ventilation : Provide natural or mechanical ventilation to minimizeexposure. If practical, use lo-

            cal mechanical exhaust ventilationat sources of air contamination such as proce-

            ssing equipment.

a.Appearance : Yellowish clear liquid

b.PH (10% sol`n) : 6.0 ～ 8.0

c.Solubility : Soluble in water

d.Boiling point : ＞250℃ (at 760 mmHg)

e.Vapour pressure : ＜0.01 mmHg (at 20℃)

f.Ionic : Nonion, Anion

g.Specific gravity(20/4℃) : 0.920 ± 0.02

Note :These physical data are typical values based on material tested but may vary fromsample

to sample. Typical values should not be construed as a guaranteedanalysis of any specif-

ic lot or as specifications for the product.

a.Conditions to avoid : None known

b.Materials to avoid : None known

c.Hazardous reactions : Hazardous polymerization does not occur.

d.Hazardous decomposition products : None known

No toxicity studies on this material and no toxicological informationwas obtained in a reasonably

extensive search of the available scientific literature.

An environmental toxicity or biodegradation study with this material isnot available.

a.Disposal considerations : Incineration, recycle

b.Miscellaneous advice : Local, state, provincialand national regulations may be more or less st-

ringent. Consult your attorney or appropriate regulatory officials forin-

formation on such disposal. This product should not be dumped, spill-

ed, rinsed or washed into sewers or public waterways.

The data provided in this section is for information only. Please applythe appropriate regulations

to properly classify your shipment for transportation.

US DOT Others : Not regulated for transport.

a.Regulation due to the industrial safety hygienic law : Not available

b.Hazard Notification (U.S. TSCA)

-         Hazard categories (40CFR370) : Not applicable

-         Section302 extremely hazardous substances : Notapplicable

-         Section313 toxic chemical(s) : Not applicable

c. CERCLA reportable quantity: Not applicable

Although the information andrecommendations set forth herein are presented in good faith and believed to becorrect as of the data hereof, Tae Won Chemical Co., Makes no representationsas to the completeness or accuracy thereof. Information is supplied upon thecondition that the persons receiving same will make their own determination asto its suitability for their purposes prior to use. In no event will Tae WonChemical Co., be responsible for damages of any nature whatsoever resultingfrom the use of or reliance upon information. No representations or warranties,either express or implied, of merchantability, fitness for a particular purposeor of any other nature are made hereunder with respect to information or theproduct to which information refers.

      韓國太遠化學株式會社，座落于韓國釜山市江西區松亭洞1729-2號。主要研發紡絲油劑，太遠TW紡絲油劑目前在全球范圍內處于優勢地位，在全亞洲范圍內基本處于領先地位。TW紡絲油劑被廣泛用于紡織行業，主要產品有：Polyester 聚酯滌綸、Nylon 尼龍、Polypropylene 聚丙烯 (俗稱PP)、Dyeing auxiliaries 染色助劑。
      2014年，太遠化學在中國國內與上海比愷姆化學有限公司建立了亞洲最大的研發中心，位于中國上海市浦東新區川沙鎮，毗鄰上海浦東國際機場。太遠化學目前已經領先進駐馬來西亞、印度尼西亞、印度、巴基斯坦和伊朗等亞洲紡絲油劑高端市場。      

座右銘：更高效率，更好服務?？偸悄軌蛱峁└玫慕鉀Q方案，只為讓客戶得到最滿意的工業效率。
      核心價值：太遠化學20多年的工業化學品研發生產經驗，與中國比愷姆深入的技術合作，獨樹一幟的產品配方，使得TW總是能夠為客戶提供更高標準、更適合的產品。
      未來趨勢：TW未來五年將逐步完善在紡絲油劑領域的拓展，增加全球范圍內的合作伙伴、疏通銷售渠道，讓優質產品能第一時間抵達客戶處。更加突出用油安全。
      TW一直以來引領著紡絲油劑標準，為客戶創造出更卓越的價值。

更多聚酯滌綸紡絲油劑請參閱目錄：